• PET Bottle Blow Machine
  • KN95 face mask making machine
  • KN95 face mask making machine
  • KN95 face mask making machine
  • Face Mask Machine and Meltblown Machine

KN95 face mask making machine 

This is a semi-automatic face mask machine is mainly used for making folding face masks. It uses ultrasonic technology to weld 3 to 6 layers of non-woven fabrics, melt-blown fabrics, activated carbon and filter materials, non-woven fabrics, and it can can produce n95, kn95, n90 masks.

send inquiry now

 

This is a semi-automatic face mask machine is mainly used for making folding face masks. It uses ultrasonic technology to weld 3 to 6 layers of non-woven fabrics, melt-blown fabrics, activated carbon and filter materials, non-woven fabrics, and it can can produce n95, kn95, n90 masks.

1589457842123398.png


N95 masks are generally composed of 3-6 layers of cloth.This mask machine can make up to 6 layers of masks.

The whole roll of cloth is put in and then compounded by a roller, the cloth is mechanically folded, pulled and unrolled by the whole roll of the nose bridge bar, and then cut to a fixed length and imported to the edge of the bag, both sides are welded to the seal by ultrasonic, then through the ultrasonic side sealing, Through the cutting knife cutting molding, Joint forming with welding of left and right ear-loops, type printing is optional, the product can be sold directly after the subsequent integral molding for disinfection

Automatic counting, can effectively control the production efficiency and production progress, frequency conversion control, can adjust the running speed of the equipment according to the actual needs

high degree of automation of the equipment, low requirements for the operation of staff, only feeding and finishing products can be, modular, user-friendly design and maintenance convenience.

The cloths are fed and pressed by folding rollers. After cutting, nose bream strip enter inside the wrapping cloth, and the both sides are welded to seal by ultrasonic, then sealed laterally by ultrasonic, then cut and shaped by cutter, which is controlled by frequency conversion. The running speed of the equipment can be adjusted according to the actual needs, matching the manual feeding & conveying device.

image.pngn95.png

image.png

Your email address will not be published. Required fields are marked *